flange
音标发音
- 英式音标 [flæn(d)ʒ]
- 美式音标 [flændʒ]
- 国际音标 [flændʒ]
- 英式发音
- 美式发音
基本解释
- n.凸缘；边缘；轮缘；【机械】法兰（使管子与管子及和阀门相互连接的零件，连接于管端）
- v.装凸缘
英汉例句
- Both flange and web exhibited satisfactory elongation characteristics ( i . e . 28 % ).
翼缘和腹板都有令人满意的延伸率 ( 即28% ). - Three structures have exhibited cracking at the ends of flange gusset plates.
已有三个结构在翼缘节点板端部出现了裂纹. - Small rectangular backup bars were used to fabricate the web - bottom flange connection.
在腹板与下翼缘的施焊中使用小矩形挡板. - These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板. - For flange size backflow preventers installed vertically ( flow down ), a fabricated air gap is recommended.
对于 垂直安装 的法兰通径防回流阀, 则建议采用预制气隙.
词组短语
- flange joint 凸缘接合
- blind flange [建]盲板；堵塞法兰
- casting flange 铸造凸缘;锻造凸缘;铸制凸缘
- flange motor 凸缘形电动机;凸缘型电念头
- bottom flange [建筑]下翼缘；[电子]下阀盖
短语
英英字典
- a flat surface sticking out from an object, used to fix it to something or to make it stronger
- A flange is a projecting edge on an object. Its purpose is to strengthen the object or to connect it to another object.
剑桥英英字典
柯林斯英英字典
专业释义
- 翼缘
In the beam-column joint zome, the column is bearing compression and tensile force. So the web may yield before the flange.
当柱与梁连接时,节点处柱受到压力和拉力作用,腹板受压区可能在翼缘未屈服前屈曲。能源科学技术
- 法兰
During the stretching of thin wall cone parts, flange deformation area and cone walldeformation area are the main deformation areas.
二、薄壁锥形件拉深中法兰变形区、锥壁变形区是主要变形区。机械工程
- 法兰
The transient sealing design method of the flange based on the tightness was put forward and programmed.
4.提出基于紧密度的法兰瞬态密封设计方法并编程实现。 - 翼缘
So the end-plate thickness should be equal to or more than the thickness of column flange, and the effect of tensile stiffener on bolts’distortion and column stability should be considered together.
因此建议在设计时适当增加端板的厚度,使其与柱翼缘厚度相近;对承拉加劲肋的设置应综合考虑其对螺栓变形及柱稳定性的影响。 - 凸缘
- 凸缘
- 缘边;凸缘;凸边;棱缘;饰边;凸板
- 凸棱
- 凸缘;翼
- 片盘
- 凸缘
- 凸缘
- 凸缘